기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

안내서로 돌아가기
영어
중국어
이전 단계

9 단계 번역 중

9 단계
De-route the digitizer and LCD cables through the steel inner frame, and remove the display from the iPhone. When reinstalling the display, carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the steel frame. This photo shows the display assembly being installed incorrectly, with a fold in the digitizer cable. When the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to one another and should be the same length, as shown in the second photo.

  • De-route the digitizer and LCD cables through the steel inner frame, and remove the display from the iPhone.

  • When reinstalling the display, carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the steel frame. This photo shows the display assembly being installed incorrectly, with a fold in the digitizer cable.

  • When the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to one another and should be the same length, as shown in the second photo.

  • If the digitizer cable has not been installed correctly, it will not reach its socket on the logic board. Do not attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through to its full length, as shown.

  • During reassembly, do not touch the metallic area at the base of the LCD data cable, as this can cause problems with the LCD. If you do touch it accidentally, clean it gently with an alcohol wipe before continuing.

从金属内面板绕出触屏和LCD的排线，移除iPhone的屏幕。

当重新安装时，小心地把排线掰直，然后小心把排线穿过金属面板。这张照片显示了屏幕错误的安装方式，触屏排线被折了。

当前面板正确安装，LCD和触屏排线都应该是互相在一起并且有相同的长度，第二张照片就显示了。

如果触屏排线没有正确安装，它够不着主板的插头了。不要想着把它拔长，否则这玩意会断掉。移除屏幕组件，掰直排线，然后再慢慢送进去，结果如图片那样。

重新组装时，不要触碰LCD的金手指，否则有可能LCD显示有问题。如果你不小心碰了，继续之前小心地用酒精布清除下。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.