주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

6 단계 번역 중

6 단계
Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing. Remove the Blu-ray drive from the PS3.
  • Lift the Blu-ray drive slightly by its right edge to dislodge the control board from its housing.

  • Remove the Blu-ray drive from the PS3.

  • After you reinstall the Blu-ray drive, be sure the control board is firmly seated in the lower case before proceeding.

  • If replacing the Blu-ray drive with a new drive, swap the circuit board from your old drive into the new drive.

Hebe das Blu-ray Laufwerk leicht an der rechten Kante an und löse so die Steuerplatine aus ihrem Sitz.

Entferne das Blu-ray Laufwerk von der PS 3.

Beim Zusammenbau musst du darauf achten, dass die Steuerplatine wieder richtig in ihren Sitz im unteren Gehäuse passt.

Wenn du das Laufwerk durch ein neues ersetzt, musst du die Steuerplatine vom alten auf das neue Laufwerk umbauen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.