주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

2 단계
In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red. You will insert the tool into the holes molded into the white plastic side case pieces. You will insert the tool into the holes molded into the white plastic side case pieces.
  • In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red.

  • You will insert the tool into the holes molded into the white plastic side case pieces.

In den nächsten Schritten, nutze die Spitze eines Spudgers oder den Stift eines Xbox 360 opening tools um die Klammern entlang der Abdeckung zu lösen. Ihre Positionen sind rot markiert.

Führe das Werkzeug in die Löcher der weißen Plastik-Seitenabdeckung ein.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.