주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
스페인어
2 단계
In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red. You will insert the tool into the holes molded into the white plastic side case pieces. You will insert the tool into the holes molded into the white plastic side case pieces.
  • In the next few steps, you will use the tip of a spudger or the finger of an Xbox 360 opening tool to release the clips along the left and right sides of the bottom vent. Their locations are highlighted in red.

  • You will insert the tool into the holes molded into the white plastic side case pieces.

En los siguientes pasos, usarás la punta de un spudger o el dedo de una herramienta de apertura de Xbox 360 para liberar los clips a lo largo de los lados izquierdo y derecho de la ventilación inferior. Sus posiciones están resaltadas en rojo.

Insertarás la herramienta en los agujeros hechos en las piezas de la carcasa lateral de plástico blanco,

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.