주요 콘텐츠로 건너뛰기

iPad Mini 3 Wi-Fi 液晶显示板更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 48개에 영향을 미칩니다.

8 단계
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 1개 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 2개 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 3개
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

将第一个插入iPad的撬片向上滑动到iPad的左上角

撬片可能会出现图片上的情况,请不要慌张。 只需将撬片拉出一点点来继续进行维修工作。 但要避免这种情况,因为粘合剂可能会粘附在LCD显示屏上变得难以清理。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.