주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 48개에 영향을 미칩니다.

21 단계 번역 중

21 단계
Leave the pick from the last step in place to prevent the adhesive from re-sealing. With a new pick, slice gently over the left-hand antenna, stopping before the home button. Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

Belasse das Plektrum des vorherigen Schrittes dort wo es ist, um das erneute Verkleben der Teile zu verhindern.

Ziehe ein neues Plektrum vorsichtig über die linksseitige Antenne und stoppe vor dem Home Button.

Ziehe das Plektrum nur von der äußeren Ecke in Richtung Mitte des iPad. Ziehe es nicht zurück in Richtung des äußeren Rands, da du ansonsten die Antenne beschädigen könntest.

Falls du das Plektrum mehrmals durch den unteren Bereich ziehen muss, dann ziehe es heraus, führe es erneut an der äußeren Ecke ein und schiebe es nach innen.

Belasse das Plektrum dort bevor du weitermachst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.