주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 48개에 영향을 미칩니다.

32 단계 번역 중

32 단계
Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on the front panel glass to allow access to the display cables.

LCDを完全に取り外さないでください。ホームボタン側でLCDはまだ数本のケーブルによってiPadに接続されています。フロントカメラ側のみ持ち上げてください。

iPadのLCDを本のページのようにめくり、カメラ付近を持ちあげリアケースのホームボタン側に裏返します。

LCDケーブルに注意しながら徐々にディスプレイを裏返してください。

ディスプレイケーブルにアクセスできるようにLCDを前面パネルガラスの上に置きます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.