주요 콘텐츠로 건너뛰기

Reemplazo de la carcasa exterior de Nintendo Wii

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

영어
스페인어
2 단계
Nintendo Wii Outer Case Replacement: 0 단계, 이미지 2개 중 1개 Nintendo Wii Outer Case Replacement: 0 단계, 이미지 2개 중 2개
  • Remove the two remaining 4.1 mm Phillips screws along the top edge of the black plastic controller port bezel.

  • Lift the bezel from the long edge furthest away from the controller ports and remove it from the Wii.

Quita los dos tornillos restantes de 4.1mm Phillips que están en el borde superior del engaste del puerto de plástico negro.

Levanta el engaste por el lado alargado más alejado de los puertos de los mandos y sácalo de la Wii.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.