주요 콘텐츠로 건너뛰기

1 단계 번역 중

1 단계
Flip the logic board to the rear side, and using a spudger/plastic pry tool to disconnect the rear camera flex cable. Flip the logic board to the rear side, and using a spudger/plastic pry tool to disconnect the rear camera flex cable.
Remove Flex Cable
  • Flip the logic board to the rear side, and using a spudger/plastic pry tool to disconnect the rear camera flex cable.

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.