주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

3 단계 번역 중

3 단계
Use your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket. Be sure you are prying up on the retaining flap, not the socket itself. Pull the ribbon cable out of its socket.
  • Use your fingernail to flip up the retaining flap on the Blu-ray ribbon cable socket.

  • Be sure you are prying up on the retaining flap, not the socket itself.

  • Pull the ribbon cable out of its socket.

  • Remove the Blu-ray drive from the PS3.

  • If replacing the Blu-ray drive, transfer the power cable to your new drive.

Klappe mit deinem Fingernagel die Halterungen der Flachbandkabel an der Buchse nach oben.

Achte darauf nur an der Halteklappe und nicht an der Fassung selbst zu hebeln.

Ziehe das Flachbandkabel aus der Fassung.

Entferne das Blu-ray-Laufwerk aus der PS3.

Wenn du das Blu-ray Laufwerk austauschst, verwende das Netzkabel vom neuen Laufwerk.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.