주요 콘텐츠로 건너뛰기

iPad Mini 3 Wi-Fi Gehäusetasteneinheit austauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

6 단계
iPad Mini 3 Wi-Fi Case Button Assembly Replacement: 0 단계, 이미지 2개 중 1개 iPad Mini 3 Wi-Fi Case Button Assembly Replacement: 0 단계, 이미지 2개 중 2개
  • Peel the power button bracket off of the rear case with a set of tweezers and move it out of the way.

  • Do not attempt to remove the power button cable bracket or cable from the iPad, as it is still attached to the rest of the button cable assembly.

  • At this point you can push the power button cover into the case and remove it from the iPad.

Löse mit einer Pinzette die Halterung der Einschalttaste aus dem Rückgehäuse heraus und schiebe sie aus dem Weg.

Versuche nicht, die Halterung oder das Kabel vom iPad zu entfernen. Sie sind immer noch mit der restlichen Tastenkabeleinheit verbunden.

An dieser Stelle kannst du die Abdeckung der Einschalttaste ausbauen. Drücke sie dazu in das Gehäuse hinein und entferne ihn vom iPad.

-[* black] Peel the power button bracket off of the rear case with a set of tweezers and move it out of the way.
+[* black] Peel the power button bracket off of the rear case with a set of [product|IF145-020|tweezers] and move it out of the way.
[* icon_caution] Do not attempt to remove the power button cable bracket or cable from the iPad, as it is still attached to the rest of the button cable assembly.
[* icon_note] At this point you can push the power button cover into the case and remove it from the iPad.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.