주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어
7 단계
With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable. Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable. During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button.
  • With a set of tweezers, flip the front end of the button bracket up to allow access to the rest of the button ribbon cable.

  • Do not remove the bracket entirely—it is still attached to the ribbon cable. Be very careful while moving the bracket, or you may tear the fine offshoots of the ribbon cable.

  • During reassembly, be sure the lock/mute switch fits properly into the notch in the lock/mute button.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.