주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

13 단계 번역 중

13 단계
The board you see here is responsible for driving the oscillation of both mirrors.
  • The board you see here is responsible for driving the oscillation of both mirrors.

  • The chips on this board receive display information from the main board and ensure that the mirrors are oscillating at the correct frequency by receiving feedback signals from the optical sensors shown in the previous step.

  • An 8 MHz crystal soldered to the board is used for timing the oscillation of the mirrors.

これは、両側のミラーの振動を発生させるために必要なボードです。

メインボードからディスプレイの情報を受信するこのチップは、ミラーが適切な周波数で振動しているか、前ページで紹介した光学センサーよりフィードバック信号を受信しています。

ボードに半田付けされた8MHzのクリスタルは、ミラーの振動を計測します。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.