주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
프랑스어

32 단계 번역 중

32 단계
Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge. Slide the pick along the Lightning connector ribbon cable and under the logic board. Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.
  • Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge.

  • Slide the pick along the Lightning connector ribbon cable and under the logic board.

  • Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.

Réinsérez le médiator sous la nappe du connecteur de charge Lightning du côté du bord de la coque.

Faites glisser le médiator le long de la nappe du connecteur de charge Lightning et sous la carte mère.

Déplacez-le lentement et soigneusement. S'il ne glisse pas facilement, appliquez plus de chaleur et réessayez. Si vous forcez trop, vous risquez de déraper et d'endommager la nappe du connecteur de charge Lightning.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.