주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

2 단계
Starting at its far left end, rock the clutch cover along its long axis while pulling it away from the clutch hinge. Working from right to left, carefully continue to release and lift the clutch along the lower edge of the display assembly.
  • Starting at its far left end, rock the clutch cover along its long axis while pulling it away from the clutch hinge.

  • Working from right to left, carefully continue to release and lift the clutch along the lower edge of the display assembly.

  • Lift the clutch cover up off the front bezel and set it aside.

  • When reinstalling the clutch cover, be sure to widen the opening when slipping it over the small black plastic cosmetic cover that fills the open end of the clutch cover when it is in place. The cosmetic cover has very thin and delicate plastic arms that hold it to the right clutch hinge.

左側先端から初めて、クラッチカバーを長辺側の軸に沿って揺り動かし、クラッチヒンジから引き離します。

ディスプレイアセンブリの下側端に沿って右側から左側に向けて動かしていき、ゆっくりとクラッチを剥がし続けながら、外します。

クラッチカバーを正面ベゼルから持ち上げて、傍に寄せます。

クラッチカバーを再装着する際は、小さな黒いプラスチックカバーの上に滑り込ませるときに開口部が十分広く開いているか確認してください。カバーは非常に薄く繊細なプラスチックが付いており、これが右側のクラッチヒンジに付けられています。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.