주요 콘텐츠로 건너뛰기

15 단계 번역 중

15 단계
After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board. A copper shield fastened to the back of the battery can also be removed at this point.
  • After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board.

  • A copper shield fastened to the back of the battery can also be removed at this point.

  • Presumably, the rear case is thin enough to warrant a copper shield for either heat dispersion or EMI protection, or both.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.