주요 콘텐츠로 건너뛰기

iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 48 안내서에 영향을 미칩니다.

21 단계
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 1개 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 2개 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 0 단계, 이미지 3개 중 3개
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.