주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
프랑스어

27 단계 번역 중

27 단계
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Insert a plastic card under the battery from the Lightning cable connector end of the iPad.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Insert a plastic card under the battery from the Lightning cable connector end of the iPad.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Tout au long de la procédure suivante, vous glisserez des cartes plastiques entre la batterie et la coque arrière de l'iPad pour décoller l'adhésif fixant la batterie. Veillez à garder les cartes aussi plates que possible pour éviter de plier la batterie, ce qui pourrait l'endommager et laisser s'échapper des produits chimiques dangereux.

Insérez une carte en plastique sous la batterie du côté du connecteur de charge Lightning.

Si vous rencontrez une résistance significative, réchauffez l'iOpener et répétez l'étape précédente pour que l'adhésif ramollisse plus longtemps.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.