주요 콘텐츠로 건너뛰기

Shimano Ultegra 6800 Caliper Brake Maintenance

3 단계
Shimano Ultegra 6800 Caliper Brake Maintenance: 0 단계, 이미지 3개 중 1개 Shimano Ultegra 6800 Caliper Brake Maintenance: 0 단계, 이미지 3개 중 2개 Shimano Ultegra 6800 Caliper Brake Maintenance: 0 단계, 이미지 3개 중 3개
  • Check if the braking pads are contacting the rim in desired locations.

  • Both pads are loosened the same way.

  • For the left caliper pad, marked in the red circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.

  • Align the bottom edge of the pad with the bottom edge of the braking surface and then tighten.

  • For the right caliper pad, marked in the yellow circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.

  • Align the top edge of the pad with the top edge of the braking surface and then tighten.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.