주요 콘텐츠로 건너뛰기
6 단계
Push the metal hinge pin inward on the D-pad side of the front lower panel with the tip of a spudger. The pin should move about 3 mm and stop. It is not necessary to try to completely remove the pin.
  • Push the metal hinge pin inward on the D-pad side of the front lower panel with the tip of a spudger.

  • The pin should move about 3 mm and stop. It is not necessary to try to completely remove the pin.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.