주요 콘텐츠로 건너뛰기

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 9 안내서에 영향을 미칩니다.

영어
프랑스어
2 단계
Insert an opening pick as far as possible into the seam between the plastic front and the metal rear panel, on the right edge of the iPod. You may need to rock the pick back and forth to slide it in farther. Use the opening pick to pry up against the plastic front panel and release five retaining tabs (seen in the third photo).
  • Insert an opening pick as far as possible into the seam between the plastic front and the metal rear panel, on the right edge of the iPod.

  • You may need to rock the pick back and forth to slide it in farther.

  • Use the opening pick to pry up against the plastic front panel and release five retaining tabs (seen in the third photo).

  • Slide the pick along the edge of the iPod and continue prying to release the rest of the retaining tabs.

  • After all five tabs along the right side are free, the case should easily open.

Sur le côté droit de l'iPod, insérez un médiator aussi loin que possible dans l'espace entre la partie avant en plastique et la coque arrière métallique.

Vous devrez probablement effectuer des mouvements d'avant en arrière avec l'outil pour y parvenir.

Faites levier contre la partie avant en plastique avec le médiator pour déclipser les 5 pattes en plastique(voir photo 3).

Glissez l'outil le long du côté avec le même mouvement de levier pour détacher toutes les pattes.

Quand les 5 pattes du côté droit sont bien déclipsées, les deux parties du boîtier devraient s'écarter facilement.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.