주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어
8 단계
If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. Rotate the battery down into its slot, and press it into position. Press the battery down against the S1 to re-adhere it in place.
  • If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the S1 to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

Si tu batería de repuesto venía con adhesivo instalado, retira ahora por completo las tiras de protección que lo cubren

Rota la batería dentro de su hueco y presiónalo ligeramente en posición

Mantén presionada la batería contra el S1 para reposicionarla en su sitio

Ahora es el mejor momento para probar encender el dispositivo-Si no lo hace, repasa los tres conectores e inténtalo de nuevo

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.