주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

8 단계
If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. Rotate the battery down into its slot, and press it into position. Press the battery down against the S1 to re-adhere it in place.
  • If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the S1 to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

バッテリーを回転させてスロットに入れ、所定の位置に押し込みます。

バッテリーをS1上に押し付けて、接着剤で再装着します。

これで、Watchの電源テストするベストなタイミングです。電源が入らない場合は、3つのコネクタをすべて再点検してから、再試行してください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.