주요 콘텐츠로 건너뛰기
영어
영어

Nintendo 3DS XL 2015 Motherboard Replacement

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

Nintendo 3DS XL 2015 Battery Replacement

안내서 정보

= 완료 = 미완료

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      1 단계

      Using a JIS #000 screwdriver, remove the six 6mm screws around the edges of the secondary cover.

      2 단계

      Using tweezers, carefully pop out the rubber bumpers located at the top side of the 3DS. Removing them will reveal another two 6mm screws. Remove these screws using a JIS #000 as well.

      3 단계

      To separate the cover, carefully lift it up and away from the hinges (in order to clear the headphone port), then pivot it towards the hinges to expose the circuit boards.

      4 단계

      Use a pair of tweezers to lift away the two plugs that latch the L/R/ZL/ZR button ribbons to the motherboard. You can now remove the back cover completely and set it aside.

      5 단계

      Use tweezers to flip up the small, hinged locking flap in order to unlock the ZIF connector securing the circle pad ribbon.

      6 단계

      Using a JIS #000 screwdriver, remove the two 8 mm screws securing the circle pad.

      7 단계

      Lift the circle pad casing upward to remove it. There will be some friction, but it should not require excessive force.

      8 단계

      Locate the gold terminal plug with a red cable at the top left of the motherboard. Using your fingers, carefully pull the plug straight upward to remove.

      9 단계

      Using tweezers, gently pull the five marked ribbons out of the ZIF connectors along the sides of the motherboard.

      10 단계

      Using a JIS #000 screwdriver, remove six 4mm screws along the edges of the motherboard.

      11 단계

      Carefully pivot the motherboard 90 degrees toward the hinges to reveal two more ZIF connectors on the underside of the motherboard.

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.