주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

4 단계
Use a nylon spudger to lift the battery out of the device. Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.
  • Use a nylon spudger to lift the battery out of the device.

  • Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.

  • Notice the wire that is connecting the battery to the device. Attempting to remove the battery completely could cause damage to the wire. Do not use a metal spudger to remove the battery, this could cause damage.

Hebe den Akku mit einem Spudger aus dem Gerät.

Hebe den Akku am Ende ohne Anschlusskabel hoch, bis du die 16 mm PH2 Schraube darunter lösen kannst.

Achte auf das Akkuanschlusskabel. Wenn du jetzt versuchst, den Akku ganz zu entfernen, kannst du das Kabel beschädigen. Benutze keine Metallwerkzeuge, das könnte den Akku beschädigen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.