주요 콘텐츠로 건너뛰기

iPod Nano 2nd Generation Case Assembly Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
4 단계
iPod Nano 2nd Generation Case Assembly Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the following two screws:

  • One #00 Phillips screw with a large head near the headphone jack.

  • One #000 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.