알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.
2 단계 번역중
-
Firmly grasp the edge of the midframe assembly.
-
Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone.
-
While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port.
-
Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe.
-
To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack.
-
You may need to heat and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult.
| + | [* icon_caution] Before you perform this step, make sure you've ejected the SIM card tray. |
|---|---|
| [* black] Firmly grasp the edge of the midframe assembly. | |
| [* black] Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone. | |
| + | [* black] While lifting the midframe, be careful to avoid snagging it on the audio jack or charging port. |
| + | [* black] Once the midframe is partially seperated, carefully run an opening pick around the edges of the rest of the phone to separate the top of the midframe. |
| + | [* icon_caution] Be careful not to accidentally insert the opening pick between the glass and display. |
| + | [* black] To avoid damage to the headphone jack, remove the top of the midframe first, then push the midframe downwards to disengage it from the headphone jack. |
| + | [* black] You may need to [guide|25705|heat|new_window=true] and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult. |
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.