주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

5 단계
Lift the camera-side end of the motherboard to separate it from the display frame. You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.
  • Lift the camera-side end of the motherboard to separate it from the display frame.

  • You may need to move some of the ribbon cables out of the way while you lift the motherboard. If the board is hard to lift, check that it is fully disconnected and not caught on any ribbon cables.

  • Do not fully remove the motherboard yet—it is still attached to the daughterboard via a ribbon cable on the underside of the motherboard.

Hebe das Motherboard am Ende bei der Kamera, um des vom Displayrahmen zu trennen.

Du musst eventuell einige der Flachbandkabel aus dem Weg schieben, während du das Motherboard anhebst. Wenn sich das Motherboard nur schwer anheben lässt, kontrolliere, ob es ganz abgetrennt ist und sich nicht an irgendwelchen Kabeln verfangen hat.

Entferne das Motherboard noch nicht vollständig — es ist noch mit einem Flachbandkabel an der Unterseite des Motherboards befestigt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.