주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
5 단계
Insert an opening pick about 0.5 inches (~12mm) under the bottom corner of the display, near the headphone jack. Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.
  • Insert an opening pick about 0.5 inches (~12mm) under the bottom corner of the display, near the headphone jack.

  • Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.

  • Leave the pick under the display to prevent the button from re-adhering to the display.

  • If you do break either of the capacitive buttons or ribbon cables, you can replace the daughterboard assembly, which includes new capacitive buttons.

Insérez un médiator à environ 12mm en dessous du coin inférieur de l'écran, près de la prise jack.

Faites attention à la nappe du bouton quand vous insérez le médiator. Elle est fragile et se déchire facilement. S'il est difficile d'insérer le médiator, faites encore chauffer le tout.

Laissez le médiator sous l'écran afin d'éviter que le bouton ré-adhère à l'écran.

Si vous cassez les nappes ou les boutons menu, vous pouvez remplacer l'ensemble carte fille qui inclut de nouveaux boutons menu.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.