주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
6 단계
Insert an opening pick about 0.5 inches (~12mm) under the opposite bottom corner of the display. Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.
  • Insert an opening pick about 0.5 inches (~12mm) under the opposite bottom corner of the display.

  • Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.

  • Leave the pick under the display to prevent the button from re-adhering to the display.

Insérez un médiator à 12mm en dessous de l'autre coin inférieur de l'écran.

Faites attention à la nappe du bouton quand vous insérez le médiator. La nappe est fragile et il est très facile de la déchirer. S'il est difficile d'insérer le médiator ou si la nappe commence à s'étirer, refaites chauffer la partie inférieure du téléphone.

Laissez le médiator sous l'écran pour empêcher le bouton de recoller à l'écran.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.