주요 콘텐츠로 건너뛰기
영어
프랑스어
4 단계
Top part of the check valve on the bottom. there is a fine screen that acts as a filter. Remove that by removing the three Phillips screws with a long #2 Phillips screwdriver. Clean the screen under running water with a brush. Reassemble after proper cleaning. Next step is to remove the top cover to get to the water supply to the K-cup.  Open the Keurig. remove two Phillips screws that hold it in place. Lift the top cover up and forward to remove it.
  • Top part of the check valve on the bottom. there is a fine screen that acts as a filter. Remove that by removing the three Phillips screws with a long #2 Phillips screwdriver. Clean the screen under running water with a brush. Reassemble after proper cleaning.

  • Next step is to remove the top cover to get to the water supply to the K-cup. Open the Keurig. remove two Phillips screws that hold it in place.

  • Lift the top cover up and forward to remove it.

Le haut de la valve anti-retour est recouvert d'un écran fin servant de filtre. Retirez les trois vis cruciformes à l'aide d'un tournevis cruciforme #2. Nettoyez le filtre sous l'eau courante à l'aide d'une brosse. Remontez-le après l'avoir correctement nettoyé.

La prochaine étape est de retirer le cache supérieur pour accéder à la K-cup. Ouvrez la Keurig en retirant les deux vis cruciformes qui la tiennent en place.

Soulevez le cache vers le haut et vers vous pour l'ôter.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.