주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 18개에 영향을 미칩니다.

영어
이탈리아어
5 단계
Firmly pull up on the suction cup to create a small gap between the front panel and the rear case. Do not pull too hard or you may shatter the glass. Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.
  • Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.

  • Do not pull too hard or you may shatter the glass.

  • Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.

Tira con fermezza la ventosa per creare una piccola fessura tra il pannello frontale e il case posteriore.

Non tirare troppo forte per evitare di rompere il vetro.

Una volta creata un'apertura sufficiente, inserisci un plettro di apertura per evitare che l'adesivo possa riattaccarsi.

-[* black] Firmly pull up on the suction cup to to create a small gap between the front panel and the rear case.
+[* black] Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] Once you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.