주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 18개에 영향을 미칩니다.

영어
프랑스어
6 단계
Slide the pick along the edge of the display, towards the headphone jack. If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
  • Slide the pick along the edge of the display, towards the headphone jack.

  • If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

  • Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

  • A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

Faites glisser le médiator en plastique le long du bord de l'écran, vers la prise casque.

Si le médiator rencontre encore beaucoup de résistance, répétez la procédure de chauffage avec l'iOpener et et chauffez plus.

Veillez à ne pas faire glisser le médiator entre l'écran LCD et le panneau frontal fusionnés, cela pourrait endommager définitivement l'écran.

En règle générale, n'insérez jamais le médiator sur plus de 6 mm dans l'iPad.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.