주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
스페인어

1 단계 번역 중

1 단계
Examine your replacement part, and your original display carefully to be sure they match. Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component. Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.
  • Examine your replacement part, and your original display carefully to be sure they match.

  • Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component.

  • Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.

  • The following step includes instructions for transferring this sensor to the new display assembly.

Examina tu parte de reemplazo y tu pantalla original con atención, para asegurarte que coincidan.

Tu pantalla de reemplazo puede no llevar en sensor de apagado/encendido que es necesario para el uso de la funda Smart Cover. Si quieres mantener el funcionamiento deberás transferir el componente.

Desuelda las cuatro almohadillas soldadas en la parte inferior izquierda de la pantalla para quitar el cable del conjunto del sensor.

El paso siguiente incluye instrucciones para transferir este sensor al nuevo conjunto de pantalla.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.