주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

1 단계 번역 중

1 단계
Examine your replacement part, and your original display carefully to be sure they match. Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component. Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.
  • Examine your replacement part, and your original display carefully to be sure they match.

  • Your replacement screen may be missing the sleep/wake sensor that is necessary for Smart Cover use. If you want to maintain functionality you will need to transfer the component.

  • Desolder the four solder pads from the lower left of the display to remove the sensor assembly cable.

  • The following step includes instructions for transferring this sensor to the new display assembly.

交換用パーツと元のディスプレイを注意深く確認してください。

交換用のスクリーンに、Smart Coverの使用に必要なスリープセンサーがない場合があります。 必要に応じて、Smart Cover用スリープセンサーを移植する必要があります。

センサーアセンブリケーブルを取り外すには、ディスプレイの左下から4つのはんだパッドを露出させます。

次の手順は、このセンサーを新しいディスプレイアセンブリに移植するため方法です。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.