주요 콘텐츠로 건너뛰기

1 단계 번역 중

1 단계
Remove the two silver T6 Torx screws and black rubber bumpers from the right side of the hard drive.
  • Remove the two silver T6 Torx screws and black rubber bumpers from the right side of the hard drive.

  • You'll need to transfer these screws and bumpers to your new hard drive if you're changing drives.

Entferne die beiden T6 Torx Schrauben und die schwarzen Gummiringe auf der rechten Seiten der Festplatte.

Die Schrauben und Gummiringe musst du auf die neue Festplatte übertragen, wenn du die Festplatte tauschst.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.