주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
네덜란드어

13 단계 번역 중

13 단계
Disconnect the headphone jack cable connector from its socket on the logic board. Pry the cable up to  free it from the adhesive securing it  to the rear case. Pull the audio jack cable out of the way of the logic board below.
  • Disconnect the headphone jack cable connector from its socket on the logic board.

  • Pry the cable up to free it from the adhesive securing it to the rear case.

  • Pull the audio jack cable out of the way of the logic board below.

Koppel de aansluiting van de audio-jack van het contact op het logic board los.

Wrik de kabel omhoog en los van de lijm die het aan de achterste behuizing bevestigt.

Trek de kabel van de audio-jack uit de weg van het logic board eronder.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.