주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

17 단계 번역 중

17 단계
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick underneath the Lightning cable where it meets the logic board.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick underneath the Lightning cable where it meets the logic board.

  • Slide the opening pick towards the bend in the cable.

Das Kabel zur Lightning Buchse ist mit dem Gehäuse verklebt. Um die Klebeverbindung zu trennen, musst du ein Plektrum zwischen Kabel und Gehäuse entlang schieben. Passe auf, dass du dabei das Lightning Connector Kabel nicht durchtrennst.

Setze das Plektrum unter das Lightning Kabel an die Stelle, wo es auf das Logic Board trifft.

Schiebe das Plektrum bis zur Biegung im Kabel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.