주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

17 단계 번역 중

17 단계
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick underneath the Lightning cable where it meets the logic board.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick underneath the Lightning cable where it meets the logic board.

  • Slide the opening pick towards the bend in the cable.

Lightningコネクタケーブルは、接着剤でケースに留められています。接着剤を剥がすには、ケーブルとケースの間に開口ピックをスライドさせます。Lightningコネクタケーブルを切断しないようご注意ください。

開口ピックをLightningケーブルの下にロジックボードに接触するまで差し込みます。

開口ピックをケーブルの湾曲部に向けてスライドさせます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.