주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
네덜란드어

23 단계 번역 중

23 단계
Insert a plastic opening tool underneath the logic board, inside the rectangular cut out, and gently pry the logic board up. Slide the opening tool down the length of the gap while continuing to pry the logic board up. Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.
  • Insert a plastic opening tool underneath the logic board, inside the rectangular cut out, and gently pry the logic board up.

  • Slide the opening tool down the length of the gap while continuing to pry the logic board up.

  • Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.

Steek een plastic openingstool, in de rechthoekige uitsnede, onder het logic board en wrik deze op voorzichtige wijze omhoog.

Schuif je openingstool langs de opening omlaag en blijf het logic board omhoog wrikken.

Til het logic board langzaam omhoog. Als je op serieuze weerstand stuit, stop je met wrikken en gebruik je de iOpener voordat je verder gaat.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.