주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

24 단계 번역 중

24 단계
Insert an opening tool underneath the logic board on the other side of the rectangular cut out and pry it up. Slide the opening tool down the length of the gap while continuing to pry the logic board up. Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.
  • Insert an opening tool underneath the logic board on the other side of the rectangular cut out and pry it up.

  • Slide the opening tool down the length of the gap while continuing to pry the logic board up.

  • Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.

Setze das Plastiköffnungswerkzeug unter das Logic Board auf der anderen Seite des rechteckigen Ausschnitts ein und hebele hoch.

Schiebe das Plastiköffnungswerkzeug entlang des Spalte und hebele das Logic Board hoch.

Hebe das Logic Board langsam hoch. Wenn du Widerstand spürst, musst du den iOpener nochmals anwenden.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.