주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

26 단계 번역 중

26 단계
Slide a plastic card underneath the center of the logic board, pushing it in as far as it will go. Slowly swing the left edge of the logic board up, while making sure it doesn't snag against any of the disconnected cables.
  • Slide a plastic card underneath the center of the logic board, pushing it in as far as it will go.

  • Slowly swing the left edge of the logic board up, while making sure it doesn't snag against any of the disconnected cables.

  • If any portion of the logic board requires excessive force to pry up, stop prying, re-apply the iOpener, and re-perform the corresponding guide steps to fully release the adhesive.

将塑料卡滑入逻辑板中央下方,尽可能将其多的推入。

慢慢地向上摆动逻辑板的左边缘,同时确保它不会阻挡任何断开的电缆。

如果逻辑板的任何部分需要过大的力量撬起,停止撬动,重新使用iOpener,并重新执行相应的引导步骤以完全分离粘合剂。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.