주요 콘텐츠로 건너뛰기
7 단계
Only perform the following steps if you intend to replace the power button ribbon cable, as shown in our store here: iPad Air 2 Power Button Assembly. If you do not need to detach the cable from the rest of assembly, skip the next 3 steps. Peel the ribbon cable with the microphone up from the plastic bracket. Peel the ribbon cable with the microphone up from the plastic bracket.
  • Only perform the following steps if you intend to replace the power button ribbon cable, as shown in our store here: iPad Air 2 Power Button Assembly. If you do not need to detach the cable from the rest of assembly, skip the next 3 steps.

  • Peel the ribbon cable with the microphone up from the plastic bracket.

Führe die folgenden Schritte nur durch, wenn du das Flachbandkabel zur Einschalttaste austauschen willst, welches wir verkaufen: iPad Air 2 Power Button Assembly. Wenn du das Kabel nicht von der restlichen Einheit abtrennen brauchst, kannst du die nächsten drei Schritte überspringen.

Ziehe das Kabel mit dem Mikrofon von der Kunststoffhalterung ab.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.