주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 16개에 영향을 미칩니다.

2 단계
Use the edge of a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
  • Use the edge of a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

  • Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.

  • Remove the metal clip covering the antenna connector.

Benutze die Kante eines Plastiköffnungswerkzeugs um den Akkustecker vorsichtig aus seinem Anschluss auf dem Logic Board nach oben zu hebeln.

Achte sehr darauf, nur am Akkustecker und nicht am Anschluss auf dem Logic Board zu hebeln. Wenn du am Anschluss auf dem Logic Board hebelst, kannst du ihn ganz abbrechen.

Entferne die Metallklammer, die den Antennenstecker bedeckt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.