주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

6 단계
Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
  • Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.

  • Remove the 4.8 mm standoff screw near the headphone jack.

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Entferne die 2,5 mm Kreuzschlitzschraube #000, die das Logic Board bei der Ein-/Ausschalttaste befestigt.

Entferne die 4,8 mm Abstandsschraube bei der Kopfhörerbuchse.

Abstandsschrauben lassen sich am besten mit einem iPhone Standoff Bit (Abstandsschrauben-Bit) und einem Bithalter entfernen.

Zur Not geht es auch mit einem kleinen Schlitzschraubendreher, sei aber besonders vorsichtig, damit du nicht abrutschst und umliegende Komponenten beschädigst.

[* red] Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
[* orange] Remove the 4.8 mm standoff screw near the headphone jack.
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.