주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

4 단계
Use the edge of a plastic opening tool to disconnect the Wi-Fi antenna cable connector from the logic board.
  • Use the edge of a plastic opening tool to disconnect the Wi-Fi antenna cable connector from the logic board.

  • When reconnecting the wifi ribbon connector to the mother board be VERY certain that the round connector at the end of the ribbon cable is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connection.

Benutze die Kante eines Plastiköffnungswerkzeugs, um den Stecker des Wi-Fi Antennenkabels vom Logic Board zu lösen.

Wenn du den Stecker des Wi-Fi Antennenkabels wieder mit dem Motherboard verbindest, achter GENAU darauf, dass der runde Stecker am Ende des Kabels genau auf seine passende Hälfte auf dem Logic Board passt bevor du ihn festdrückst. Andernfalls gehen beide Hälften der Verbindung sehr wahrscheinlich kaputt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.