주요 콘텐츠로 건너뛰기
2 단계
Make sure the machine is turned off and unplugged.
  • Make sure the machine is turned off and unplugged.

  • Set your voltmeter in continuity mode and place the leads on the two 90 degree prongs on the boiler's heating element.

  • It does not matter which lead touches which prong as you're just testing for a break, or "open" in the heating element circuit.'''

  • If the voltmeter shows 0, or "open", then there is an issue with the heating element's continuity and it needs to be replaced.

  • If given a reading, then your heating element is fine.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.