주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied. Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
  • Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.

  • Insert a plastic opening tool into the crevice between the screen and the side of the tablet.

  • Go around the entire crevice with the plastic opening tool.

  • Set aside the separated front and rear panels of the device.

Sei vorsichtig, das Display ist mit empfindlichen Kabeln verbunden, die beschädigt werden können, wenn zu viel Kraft ausgeübt wird.

Stecke ein Öffnungswerkzeug aus Plastik in den Spalt zwischen dem Display und der Umrandung.

Gehe den ganzen Spalt mit dem Öffnungswerkzeug entlang.

Lege die Rückblende neben das restliche Gehäuse.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.