Craftsman Circular Saw Power Cord Repair

영어

한국어

4 단계 번역중

4 단계

Using wire strippers, strip a half an inch to three quarters of an inch of insulation off of each wire.
After you strip the insulation off of the wires, twist the end of the wire in between your fingers so that the strands don't fray apart.
The amount of insulation you take off of each side doesn't have to exactly equal, but try to make it as close as possible.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.