Skip to main content
4 단계
Sticky nightmares still haunt our teardown engineers after the harrowing Surface Pro 3 teardown, and this year we've prepared for the worst. Things start to heat up in the teardown room as the iOpener battles to weaken the display's adhesive. Our iSclack joins the fight to provide us the leverage we need to make our entrance, and dare we say it, things seem easier than before.
  • Sticky nightmares still haunt our teardown engineers after the harrowing Surface Pro 3 teardown, and this year we've prepared for the worst.

  • Things start to heat up in the teardown room as the iOpener battles to weaken the display's adhesive.

  • Our iSclack joins the fight to provide us the leverage we need to make our entrance, and dare we say it, things seem easier than before.

  • Not even a Pro can keep us out. As soon as we get an opening pick underneath the edge of the display it's off to the races!

  • We strain our ears to listen for the telltale cracking of glass, but it seems like we're getting away with this opening procedure shard-free!

即便是在Surface Pro 3痛苦的拆解之后,恐怖的粘合依旧困扰着我们的拆解工程师。因此今年我们做好了最坏的打算。

战场的开端,是由iOpener带领的,我们利用它来软化屏幕的胶水。

我们的iSclack也加入了战斗,为的是提供足够的拉力,让我们能进一步深入敌后。

小样,即便你叫Pro,也是不能把我们挡在门外的。在我们把opening pick塞进屏幕底部边缘后,拉锯战正式结束。

我们还特别侧耳倾听了是否有玻璃碎裂的声音,但似乎我们只要按照这个方法拆解,就能很幸运地避免碎屏!

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.